REFORMLUX PLUS-205 (C2TES2)
  • About the product : REFORMLUX PLUS-205 (C2TES2) fully elastic, two-component adhesive, with reduced slip and long-lasting use when mixed, based on cement and polymer resins, corresponding to class S2.

    • Component A : Powder in craft bags of 20 kg.
    • Component B : İn acrylic liquid canisters with a capacity of 4.6 liters.

    Application areas :

    • For gluing tiles, ceramics, natural stone, travertine, decorative bricks, granite, marble and other facing materials in interior and exterior spaces.
    • Used to securely bond cladding materials such as ceramic, granite, porcelain and marble to the exterior surfaces of buildings up to 30 meters high.
    • For gluing tiles 60x60 cm and ceramics up to 15 m high on external surfaces.
    • For gluing tiles 40x40 cm and ceramics up to 30 m high on external surfaces.
    • In rooms with water-based floor heating systems, as well as on the floors and walls of refrigeration rooms.
    • Bonding of new ceramics without removing old ceramics.
    • Swimming, in large bodies of water, on the walls of industrial and high-rise buildings.
    • In places such as shops, business centers with heavy pedestrian and freight traffic, large shopping centers, hospitals and schools.

    Advantages :

    • Elastic, easy to use.
    • Possesses high adhesive ability. 
    • Class S2 is resistant to surface stresses caused by sudden temperature changes due to its flexibility.
    • Easy to apply in horizontal and vertical directions and non-slip.
    • Long shelf life.
    • Long time of use in a mixed state.

 AZS 039 (TS 11140) and  EN 12004.  Very high quality advanced cement-based elastic adhesive developed for decorative natural stone and large cladding materials of this type

                              Application Information

Adhesion resistance

≥ 1 N/mm²

Using temperature

(+5°C) - (+30°C)

Adhesion resistance after immersion in water

≥ 1 N/mm²

Mixture ratio

4.6 lt / 20 kg

Tensile strength after thermal moistening

≥ 1 N/mm²

Duration of use in mixed case

5 hours

Tensile strength after freeze-thaw

≥ 1 N/mm²

Formation of a thin layer on the surface* (For outdoor use)

an average of 30 minutes

Adhesion resistance

A2S1do

Consumption

4.5-6.5 kg/m²

Resistance after gluing (at least 30 min.)

≥ 0.5 N/mm²

Thickness

3-6-8 mm

Slipping

≤ 0.5 mm²

Intermediate filler time: On the wall

24 hours

Transverse deformation

≥5 mm-S2

Intermediate filler time: On the floor

48 hours

Working temperature

From -20°C to  +80°C

 

 

* These values have been obtained under laboratory conditions (temperature 23°C ± 2, relative humidity 50%) and may vary depending on site application. 

partner-img