MEGALUX-202 (C2TE) WHITE
  • About the product : MEGALUX-202 (C2TE) WHITE is an elastic, one-component, polymeric, white cement based, high performance adhesive for porcelain stoneware, mosaics, glass mosaics, marble, granite and other wall tiles.                   

    Application areas :

    • Interior and exterior spaces. 
    • On horizontal and vertical surfaces.
    • When laying large floor and wall ceramics, granite, marble and all types of facing materials made of natural stone.
    • In rooms with underfloor heating water systems, as well as on the floors and walls of refrigeration chambers.
    • In gluing new ceramics without tearing old granite and marble.
    • Applicable in swimming pools, potable water tanks, large swimming pools, walls of industrial and high-rise buildings.
    • When gluing glass mosaic.
    • On surfaces such as concrete, plaster, screed.

    Advantages :

    • Elastic, highly adhesive, easy to use.
    • Only when mixed with water is brought to a ready state.
    • Easy to apply in both horizontal and vertical directions. 
    • Resistant to high temperature and frost, sudden temperature changes do not affect the quality of the product.  
    • Has a long time of use in the mixed state.

     

       AZS 039 (TS 11140) and  EN 12004

Very high quality advanced cement-based adhesive for facing (marble, granite, ceramic etc.) slabs

                            Application Information

Adhesion resistance

≥ 1 N/mm²

Using temperature

(+5°C) - (+30°C)

Adhesion resistance after immersion in water

≥ 1 N/mm²

Mixture ratio

6.0-7.0 liters of water/25 kg

Tensile strength after thermal moistening

≥ 1 N/mm²

Duration of use in mixed case

4 hours

Tensile strength after freeze-thaw

≥ 1 N/mm²

Formation of a thin layer on the surface* (For outdoor use)

an average of 25 minutes

Adhesion resistance

A1

Consumption

3-5 kg/m²

 

 

Thickness

3 - 6 mm

 

 

Intermediate filler time: On the wall*

24 hours

 

 

Intermediate filler time: On the floor*

48 hours

  * These values have been obtained under laboratory conditions (temperature 23°C ± 2, relative humidity 50%) and may vary depending on site application. 

partner-img